Use these glove boxes to maintain ideal atmospheric conditions for manipulation and transferring sensitive materials and organisms. Double-layered neoprene gaskets provide a tight seal (up to 1.5 mm Hg) to enable low-pressure vacuum / gas fill cycling to establish main chamber atmosphere. Vacuum-capable transfer chamber enables easy sample transfers without disturbing main chamber conditions. Clear acrylic top with built-in fluorescent light and white matched die-molded bottom illuminate your work area and reduce shadows.
Anaerobic Organism Chamber
A catalyst heater works in mixed gas chamber environment (typically 85% N2, 10% H2, 5% CO2) to remove O2 and maintain incubation temperature. Recirculating atmosphere through drying train removes moisture and metabolic waste gases. Drying train is removable in-process using quick-disconnect fittings; desiccant is easily removed for regeneration.
What抯 included: one pair of size 9-1/2 white Hypalon?gloves, a catalyst heater with two Palladium canisters, two vacuum/pressure pumps, three drying canisters with quick-disconnect fittings, an adjustable vacuum gauge, a transfer tray; four purging valves, a four-outlet electrical strip, and a 6-ft three-wire power cord with plug.
Temperature and Humidity Controlled Chamber
Control atmospheric conditions to ±1°C and ±2% Rh. Use the 8?color touch screen controller to set and monitor chamber temperature and humidity conditions. Controller has four preset conditions, password protection, 24-hour on-screen event datalogging, and serial port for documentation. Temperature is controlled using Peltier thermoelectric system. Humidity balance is maintained using nebulizer and inert gas or contact our Application Specialists for information regarding optional circulation pump with molecular sieve drying train.
What抯 included: one pair of size 9-1/2 white Hypalon?gloves, vacuum gauge, four purging valves, inert gas inlet, and a 6-ft three-wire power cord with plug.
Temperature and Humidity Controlled Glove Box
Control atmospheric conditions to ±1癈 and ±2% RH. Use the large 8? color touch screen controller to set and monitor chamber temperature and humidity conditions. Controller has four preset conditions, password protection, 24-hour on-screen event datalogging, and a DB15 serial port for documentation. Temperature is controlled using Peltier thermoelectric system. Humidity balance is maintained using nebulizer and inert gas; contact our Application Specialists for information regarding an optional circulation pump with molecular sieve drying train.
What抯 included: one pair of size 91?2 white Hypalon gloves, vacuum gauge, four purging valves, inert gas inlet, and a 6-ft three-wire power cord with plug.
滬公網(wǎng)安備31011502016460號
